Planning work? Office (877) 524-6674, Monday–Friday, 9:00am–5:00pm ETOffice (877) 524-6674

TS Controls home

Industrial robot programming: KUKA. FANUC. ABB.

Define the motion. We will program the cell and simulate it offline before anyone climbs the cage. From Anderson, SC, across the Upstate and on site nationwide.

Request a quote
Line down? (877) 790-4697 24/7, subject to personnel availability
Robots
KUKA, FANUC, ABB
Offline
Simulated before startup
Tooling
EOAT built in-house

Illustrative model

  1. Define the motionEach robot's path into the fixture
  2. Simulate it offlineBefore anyone climbs the cage
  3. StartupThe robots run the simulated paths

What we program

What we program
AreaWhat we program
ControllersKUKA KR C4 and KR C5, FANUC R-30iB Plus, ABB OmniCore and IRC5
SoftwareKRL, FANUC TP and KAREL, RAPID; WorkVisual, ROBOGUIDE, RobotStudio
NetworksPROFINET or EtherNet/IP, from the PLC that runs the cell
SafetyKUKA SafeOperation, FANUC DCS, ABB SafeMove

KUKA robots

KR C5 is the newest generation; KR C4 is widely installed; KR C2 is legacy.

Controllers
KR C4, KR C5 (and KR C2)
Teach pendant
smartPAD
Software
KRL; WorkVisual (configuration), KUKA.Sim (simulation), KUKA.OfficeLite (virtual controller)
Safety option
KUKA SafeOperation, configured on the controller with a signed checksum

FANUC robots

R-30iB Plus is widely installed; R-30iA and R-J3iB are legacy.

Controllers
R-30iB Plus, R-30iB Mate Plus (and R-30iA, R-J3iB)
Teach pendant
iPendant
Software
TP (teach pendant) and KAREL; ROBOGUIDE (HandlingPRO, WeldPRO and others)
Safety option
FANUC DCS, configured on the controller with a signed checksum

ABB robots

OmniCore is ABB’s newest controller; IRC5 is widely installed; S4C+ is legacy.

Controllers
OmniCore, IRC5 (and S4C+)
Teach pendant
FlexPendant
Software
RAPID; RobotStudio; RobotWare 7 (OmniCore) and RobotWare 6 (IRC5)
Safety option
ABB SafeMove, configured on the controller with a signed checksum

Typical jobs

Cell programming

Repeatable high-accuracy paths or flexible, vision-guided work, from hemming and roller cells to body and assembly programs.

Offline programming

The cell, the robot, and the fixtures mapped graphically before anyone climbs the cage. What to send for a simulation.

Platform support

KUKA, FANUC, and ABB. WorkVisual, RoboGuide, RobotStudio. KRL, FANUC TP, and RAPID. Multi-robot cells included.

End-of-arm tooling

Weld guns, spray, grinders, grippers, vacuum, magnets. We build EOAT in-house or modify what you have.

Plants we’ve supported

All plants supported
  • BMW Plant 10Automotive, Greer, SC
  • Mercedes-Benz U.S. InternationalAutomotive, Vance, AL
  • TeslaElectric vehicle production
  • SpaceXAerospace
  • Robert Bosch LLCAutomotive, Charleston, SC
  • thyssenkrupp TKAE / TKABAutomation engineering, Body solutions
  • Our next value-added customerYour plant

Straight answers.

Which robot brands do you program?

KUKA, FANUC, and ABB, in WorkVisual, RoboGuide, and RobotStudio, with KRL, FANUC TP, and RAPID. Multi-robot cells included.

Can a robot cell be programmed offline before the work on site?

Yes. We map the cell, the robot, and the fixtures graphically and simulate the program offline before anyone climbs the cage.

Is the PLC that runs the robot cell programmed too?

Yes. A lot of cell problems live at the boundary: the robot is waiting on the PLC, the PLC is waiting on the robot, and each vendor points at the other. We program both sides: KUKA, FANUC, and ABB robots, and Siemens (TIA Portal, S7-1500) or Allen-Bradley (ControlLogix, Studio 5000) cell logic, plus the safety and network layers in between (PROFINET, EtherNet/IP). One team owns the handshake.

Which customers have you done robot work for?

Robot work at the plants we have supported includes multi-robot cell production support, robot teaching, and commissioning for body and assembly programs (thyssenkrupp TKAE / TKAB); multi-robot cell production support and robot commissioning (Robert Bosch LLC, Charleston, SC); hemming and roller cells, robot and PLC commissioning and launch support (Mercedes-Benz U.S. International, Vance, AL); and on-site robot and PLC support through production (Volvo).

Are multi-robot weld cells part of the work?

Yes. Multi-robot cell production support, robot teaching, and commissioning for body and assembly programs, at automotive plants and their integrators.

Is end-of-arm tooling built in-house?

Yes. Weld guns, spray, grinders, grippers, vacuum, and magnets. We build EOAT in-house or modify what you have.

What should I send with a robotics RFQ?

Describe the cell: the robots, the fixtures, the motion you need, and the outage window. Attach layouts or drawings with the form on this page. Line down? Call (877) 790-4697, 24/7, subject to personnel availability.

Describe the cell.

Line down? (877) 790-4697 24/7, subject to personnel availability

What to send

  • STEP 5: the whole project folder, zipped (the program file ends in ST.S5D, plus the other S5D files beside it).
  • STEP 7 V5.x: a SIMATIC Manager archive (.zip), from File > Archive.
  • TIA Portal: a project archive (.zapNN) from Project > Archive, and the TIA Portal version and update level.
  • RSLogix 5 and 500: the program file (.RSP or .RSS), saved from the software or uploaded from the PLC first.
  • Studio 5000: the project (.ACD) or an .L5X export, and the controller firmware revision.
  • Robot backups: a full KUKA archive, a FANUC “All of above” backup or an ABB controller backup.

Which files to include, by platform

Office: (877) 524-6674, Mon–Fri 9:00am–5:00pm ET

Email: sales@ts-controls.com

Mailing address: 6650 Rivers Ave Ste. 105, N. Charleston, SC 29406

Quote request

Used only to call you about this request. We do not text it. See our Privacy Policy. Want job texts? Sign up here (optional).

PDF, Office, ZIP, or drawing, up to 10 MB; zip project files (ACD, RSS, TIA archives) first. It is emailed to sales@ts-controls.com.

Requests sent by 3 PM Eastern get a reply the same business day.